ΚΑΤΗΓΟΡΙΕΣ

BENRO A373FBS8 PRO VIDEO TRIPOD NEW

BENRO A373FBS8 PRO VIDEO TRIPOD NEW
Κατασκευαστής: Benro
Κωδικός Προϊόντος: A373FBS8PRO
Διαθεσιμότητα: Σε απόθεμα
470,00€
Δωρεάν μεταφορικά
5 Χρόνια Εγγύηση Ελληνικής Αντιπροσωπείας
Ποσότητα: Καλάθι

BENRO A373FBS8 PRO VIDEO TRIPOD NEW

Benro's A373F Aluminum Single-Tube Tripod features a 75mm bowl and includes a 75mm half-ball adapter. It's paired with the S8Pro Fluid Video Head, which has a 75mm flat base that attaches right to the half-ball adapter. The head supports up to 17.6 lb loads, and thanks to the flat base design with a 3/8"-16 thread underneath, the head can be moved from the tripod directly to sliders, jibs, and other support gear. The versatile system has a compact design with 2-stage/3-section single-tube legs and both rubber and spiked feet for use on virtually all surfaces. Each leg of the tripod is independently adjustable into three positions, allowing you to set up quickly and efficiently.

The S8Pro head offers 7+0 steps of counterbalance and continuous pan and tilt drag. There are also independent pan and tilt locks. The tilt range is a wide +90/-75°, and the pan range is a full 360°. With the head attached, the tripod reaches a maximum height of 64". The minimum height is 12.8", which is a low height that isn't too common among most tripods. At this height, you can set up the tripod for low-angle shots.

Some parts of the head are made of magnesium and other parts of aluminum. Virtually the entire head, including its knobs, is made of robust yet lightweight metal. A pan bar is included that can be attached to a rosette adapter on the left or right side of the head, for left- or right-handed users. A camera plate is included that can be adjusted forward/backward to let you find the optimal balance for your camera. A safety lock on the plate ensures that once mounted, the plate won't slip out if you move it in either direction too much. Two camera screws are supplied—1/4"-20 and 3/8"-16—that can be stored underneath the camera plate on the head itself, in dedicated slots. For attaching accessories, there's a 3/8"-16 threaded hole on each side of the head to which you can secure articulating arms.

S8Pro Fluid Head

17.6 lb payload
75mm flat base with a 3/8"-16 thread
Can also be mounted directly on most sliders, jibs, and monopods
7+0 steps of counterbalance
Continuous pan and tilt drag
Independent pan and tilt locks
+90/-75° tilt range
360° pan range
Made of magnesium and aluminum
Rosette adapters on the left and right side for attaching the included pan bar
Sliding camera plate with safety lock
1/4"-20 and 3/8"-16 camera screws included and can be stored in dedicated spaces on the top of the head, underneath the camera plate
Two 3/8"-16 threaded holes for accessories

A373F Tripod

75mm bowl tripod with a 75mm half-ball adapter
Maximum height of 64" with the S8Pro attached
Low-angle minimum height of 12.8"
Single-tube legs independently adjustable into three positions
Spiked and rubber feet
Flip leg locks
Aluminum construction

Benro S8Pro Tripod System Specs

Camera Plate

Camera Plate Features Sliding Balance Plate
Camera Mounting Screw 1 x 1/4"-20 Male
1 x 3/8"-16 Male
Safety Lock Yes

Head

Base Mount 3/8"-16 Female
Counter Balance Incremental 7-Step Plus 0
Pan Handle Fittings 2 x Rosette
Bubble Level 1 x Illuminated
Accessory Mounting 2 x 3/8"-16 Female Thread
Base Diameter 2.95" / 75 mm

Pan & Tilt

Drag Control Pan: Continuous
Tilt: Continuous
Drag Type Fluid
Vertical Tilt +90° to -75°
Panning Range 360°
Independent Pan Lock Yes
Independent Tilt Lock Yes

Legs

Leg Lock Type Flip Lock
Leg Positions 3 Positions
Leg Sections 3
Feet Features Rubber, Spiked
Spreader None

General

Load Capacity 17.6 lb / 7.98 kg
Maximum Working Height 64" / 162.56 cm
Minimum Working Height 12.8" / 32.51 cm
Materials Aluminum, Magnesium
Weight 10.8 lb / 4.90 kg

Packaging Info

Package Weight 16.25 lb
Box Dimensions (LxWxH) 34 x 8.5 x 8.5"